| 項 目 project | 單位Company | 型號/技術參數 Model / technical parameters | ||
| ZHM-450I | ||||
| 尺寸 size | 工作臺面尺寸（長×寬） Size of worktable (length * width) | mm | 450×150 | |
| 工作臺移動量（手動：左右×前後）Movement of table (Manual: left, right, front and rear) | 465×160 | |||
| 工作臺面至砂輪下麵的距離 Distance from work table to grinding wheel | 357.5 | |||
| 可安裝標準磁臺的尺寸（長×寬×高）Size of standard magnetic table (length * width * height) | 400×150 | |||
| 加工工件最大重量（含磁臺）Max. weight of machined workpiece (including magnetic table) | kg | 60 | ||
| 工作臺 Workbench | T型槽尺寸×槽數 T groove size * number of slots | mm×No | 17×1 | |
| 左右進給速度（平均）Left and right feed speed (average) | m/min | / | ||
| 前後手動進給 Front and rear manual feed | 手輪旋轉1周進給量Hand wheel rotation, 1 weeks to the amount | mm | 5 | |
| 刻度盤1刻度進給量 Dial 1 feed | mm | 0.02 | ||
| 砂輪 grinding wheel | 手動進給Manual feed | 手輪旋轉1周進給量（×0.1/×1/×10）Hand wheel rotation for 1 weeks (0.1/ * 1/ * 10) | 1 | |
| 刻度盤1刻度進給量（×0.1/×1/×10）Dial 1 feed (* 0.1/ * 1/ * 10) | 0.005 | |||
| 外徑（50/60HZ）×寬×內徑 Outer diameter (50/60HZ) * * width * internal diameter | mm | ø180×13×ø31.75 | ||
| 轉速（50/60HZ）Speed (50/60HZ) | RPM | 2850/3600 | ||
| 馬達motor | 主軸馬達 Spindle motor | KW/P | 1.5/2 | |
| 液壓馬達 Hydraulic motor | / | |||
| 電源 Power Supply | 電源容量（含特別附帶的卡盤、注入裝置）Power capacity (including a specially attached chuck, injection device) | KVA | 2 | |
| 外形尺寸 Outline size | 寬×深×高 Width * depth * height | mm | 1675×1214×1968 | |
| 機床重量 Machine weight | 淨重 Net weight | kg | 880 | |
注：聯系我時，請說是在“傲立機床網”上看到的，謝謝！
